Products

AV switching and distribution

This is a Special Order Item

4X4 Uhd 4K Hdr Hdbt Matrix Kit now with 2 X scaling receivers Wyrestorm

Product Code: WY-MXV0404H2AKIT

Brand
Wyrestorm
RRP $5,959.00
 
 
Quantity In Cart:  
Unit of Measure
EACH

 

5 Year
Technical Specifications
Brands WyreStorm
Input/output type HDBaseT
Product type AV matrixes
  • Details
  • Downloads
  • Where to Buy
  • Ordering

4K HDR 4:4:4 60Hz HDBaseT™ 4x4 Matrix Kit with Audio De-Embed & CEC Triggering (4K: 35m/114ft, 1080p: 70m/230ft)

MXV-0404-H2A-KIT
Offering transmission of 18Gbps HDMI content up to 35m/115ft by pairing HDBaseT with WyreStorm’s powerful lossless compression algorithm, the MXV-0404-H2A-KIT brings the familiar power of the WyreStorm H2-series to a compact 1U chassis. Unlike competing compression methods such as CSC, which permanently remove color data, WyreStorm’s VLC uses a lossless compression technology to ensure signal integrity.

With 4 HDBaseT zone outputs and a mirrored HDMI output offering CEC triggering for all 5 connected screens, this kit enhances the offering for the modern home or commercial installation. Internal audio switching allows audio breakout from source or zone output via S/PDIF and analog stereo ports.

HDMI MAXED OUT
Bringing our lossless compression technology from our flagship H2XC matrix platform to the other end of the range, the MXV-0404-H2A can handle both current & future video content technologies up to 4K/60 4:4:4 and high framerate HDR. The highest possible bandwidth that currently exists according to the HDMI 2.0 specification can still be sent over HDBaseT using the latest in lossless compression technology.

DE-EMBEDDING AUDIO
With audio functionality to match its video capability, the MXV 4x4 has the ability to extract audio signals from either source devices or from the HDBaseT™ output, following the zone. Having S/PDIF and analogue connectivity means having the flexibility to use multi-channel 5.1 or stereo audio signals.

MIRRORED HDMI OUTPUT
In addition to the audio breakout ports, the H2A-KIT also features a single HDMI output port which can be used to connect an AVR for zone 1 or - via a WyreStorm H2 extender or hybrid optical cable - send a mirrored 18Gbps HDMI signal to a 5th screen.

CEC TRIGGERING
Working automatically or triggered via the API, the MXV-0404-H2A can send power commands to all connected screens or projectors compatible with CEC meaning an integrated autonomous control solution.


FEATURES

  • 4x4 HDBaseT 4K matrix switcher supporting:
  • Content up to 4K/60 4:4:4 & RGB 8-bit
  • The latest HDR standards, including HDR-10, HLG and Dolby Vision™
  • HDCP 2.2 encryption technology ensuring compatibility with the latest 4K UHD content and sources
  • HD Multichannel audio up to DTS:X and Dolby Atmos™ to all outputs
  • HDMI Inputs HDBaseT™ outputs and mirrored HDMI port supports bandwidths of up to 18Gbps
  • Capable of transmitting content to 35m/115ft over Cat6 cable or 1080p/60Hz to 70m/230ft over HDBaseT using light compression
  • Automatic (signal sensing) or manual (API operated) CEC power triggering of all connected screens or projectors (CEC compatibility required)
  • Assignable audio outputs allow audio to be de-embedded from sources or HDBaseT output via mirrored stereo RCA and S/PDIF ports
  • A/V Mute mode allows the routing of a signal to an output to be deactivated
  • API controlled standby mode allows the matrix to enter a low power state when not in use, cutting power consumption by up to 34%
  • Mirrored HDMI output allows connection of a local AVR, local screen or additional display over distance via an HDBaseT extender or hybrid optical HDMI cable
  • API triggered A/V mute allows a signal to be deactivated to any zone
  • 4x PoH receivers included – a complete kit for quicker, easier and more reliable installation and AV distribution straight out of the box
  • HDBaseT technology handles video, audio, bidirectional IR and PoH to display zones along a single Cat6 cable
  • Can be combined with WyreStorm EXP-CON-DAC-D digital audio converter to downmix Dolby Digital 5.1 content to mix stereo and surround sound zones
  • SmartEDID™ removes conflict when mixing 1080p & 4K displays by dynamically detecting display/source capabilities and automatically requesting the highest possible resolution for all displays
  • Additional EDID management through DIP switches for global setting or via WebUI for independent management of EDID per source
  • Flexible control options – front panel buttons, infrared remote control, local IR, RS-232, Telnet or WebUI
  • Central RS-232 control compatible major third party control systems with full integration protocols available for Crestron, AMX, RTI & Control4
  • Embedded WebUI allows installer setup and configuration and provides switching interface
  • Simple switching matrix remote control included, which can also be learned into a universal remote handset to allow the control of multiple devices from one handset
  • IR 3.5mm mini-jack ports for each output for IR emitters and IR receivers
  • Compact 1U chassis with adjustable depth rack mounting brackets included

ADDITIONAL FEATURES ON RECEIVERS
  • Low profile chassis for quick, easy and flush installations
  • Multichannel audio supports 7.1 DTS:X and Dolby Atmos
  • Additional power connectivity via threaded bushings for both standard and locking DC power plugs
  • LED indication for visual power supply to receiver via PoH or mains, signal status to show established connection to display, HDBaseT link to matrix and HDCP confirmation to illustrate the presence of encryption within a signal

SPECIFICATIONS

Audio and Video 
  • Matrix
    • Inputs:
    • 4x HDMI In: 19-pin type A
    • Outputs:
    • 4x Audio Out: RCA Female Stereo (L/R)
    • 4x S/PDIF Out: RCA Female
    • 4x HDBT Out: 8-pin RJ-45 Female 1x HDMI Out: 19-pin type A
  • Receivers
    • Inputs: 1x HDBT In: 8-pin RJ-45 Female
    • Outputs: 1x HDMI Out: 19-pin type A
  • Output Video Encoding: HDBaseT™ Class B
  • Encoding Data Rate: 9.2Gbps
  • End to End Latency: 10μs (micro seconds)
  • Audio Formats
    • Analog: 2ch Analog
    • S/PDIF: 2ch LPCM | Dolby Digital/DTS up to 5.1ch
    • HDMI: 2ch LPCM | Multichannel up to Dolby Atmos and DTS-X
  • Video Resolutions (Max)Video ResolutionsHDMICat6Cat6a/7
    1920x1080p @60Hz 12bit15m/49ft60m/197ft70m/230ft
    1920x1080p @60Hz 16bit7m/23ft35m/115ft40m/131ft
    3840x2160p @24Hz 10bit 4:2:0 HDR3m/10ft35m/115ft40m/131ft
    3840x2160p @30Hz 8bit 4:4:47m/23ft Input |15m/49ft Output35m/115ft40m/131ft
    3840x2160p @60Hz 10bit 4:2:0 HDR3m/10ft35m/115ft40m/131ft
    4096x2160p @60Hz 8bit 4:2:07m/23ft35m/115ft40m/131ft
    4096x2160p @60Hz 8bit 4:4:43m/10ft35m/115ft40m/131ft
  • Note: WyreStorm recommends the use of shielded category cable to minimize signal noise and interference.
  • Supported Standards: DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100
  • Maximum Pixel Clock: HDMI: 600MHz | HDBaseT: 297MHz
Communication and Control
  • HDMI: HDMI 2.0 | HDCP 2.2 | EDID | CEC | DVI/D supported with adapter (not included)
  • HDBaseT: HDMI 2.0 | HDCP 2.2 | EDID | CEC | 1-way PoH | Bidirectional IR
  • CEC: CEC power triggering for connected screens – Requires CEC compatibility
  •  IR:
    • Matrix
    • 1x IR Ext: 3.5mm (1/8in) TRS Stereo
    • 4x IR RX: 3.5mm (1/8in) TRS Stereo
    • 4x IR TX: 3.5mm (1/8in) TS Mono
    • Bidirectional over HDBaseT
    • Receivers
    • 1x IR TX: 3.5mm (1/8in) TS Mono
    • 1x IR RX: 3.5mm (1/8in) TRS Stereo
    • Bidirectional over HDBaseT
  • RS-232
    • Matrix:1x RS-232: 9-pin DB9 Female
    • Receivers: 1x RS-232: 3-pin Terminal Block - 3.5mm
  • Ethernet (Matrix) 1x LAN: 8-pin RJ-45 Female
Power
  • Power Supply
    • Matrix:100~240V AC 50/60Hz
    • Receivers:18V DC (Optional)
  • PoH (Matrix):1-way Matrix to Receiver
  • Max Power Consumption
    • Matrix:
      • 85W with 4 RXs Connected via PoH
    • Receivers:
      • 8W with External PSU each receiver
      • 12.5W via PoH each receiver
Environmental
  • Operating Temperature (Matrix)
    • 32°F ~ 113°F (0°C ~ 45°C)
    • 10% ~ 90%, non-condensing
  • StorageTemperature (Matrix)
    • -4°F to ~ 158°F (-20°C ~ +70°C)
    • 10% ~ 90%, non-condensing
  • Maximum BTU:
    • Matrix:
      • 290 BTU/hr
    • Receivers:
      • 28 BTU/hr with External PSU each receiver
      • 43 BTU/hr via PoH each receiver
Dimensions & Weight
  1. Matrix:
    • Rack Units:1U
    • Height: 43.5mm/1.72in
    • Width: 440mm/17.33in
    • Depth: 300mm/11.82in
    • Weight: 4.06kg/8.93lbs
  2. Receivers:
    1. Rack Units:<1U
    2. Height: 15.2mm/0.6in
    3. Width: 136.4mm/5.38in
    4. Depth: 74.2mm/2.93in
    5. Weight: 0.24kg/0.53lbs
Regulatory
  • Safety and Emission CE | FCC | RoHS | RCM





Product Documents

No documents available

Ordering from Amber Technology

Logging in

New to Amber Technology?

You can place an order using guest checkout, and we’ll email your order details when we ship.

You can register by following this link. When you register, we will retain your order history and checkout information for future transactions. Registration is quick and free. We’ll never share your registration details outside Amber Technology.

Are you an Amber Technology account customer?

Your user id is the email address that’s recorded for your account. If you don’t know or have forgotten your password, please reset it using this link.

If you need help with any login or site-related issues, please contact us here.

Shipping

Orders placed though the Amber Technology website are despatched from our Sydney warehouse. Orders placed before 1.00pm Sydney time (for items in stock) will generally be shipped on the same day. 

We ship using Startrack Express. We deliver Australia-wide to residential, business and PO box addresses.

Shipping is free for all orders over $275 including GST (effective 1 March 2018). There is a $22 (including GST) shipping and handling charge for all orders under $275 including GST. 

Tracking

You can track your shipment through the web sites of our couriers:

Star Track Express 

Tracking numbers for your order can be found in the order history section of your dashboard. If you have any questions regarding shipping, please contact us.

Warranty

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

All items purchased from Amber Technology will be covered under warranty. The duration and terms of this warranty are specified by the manufacturer unless otherwise stated. Warranty information is available on the individual product listings on this site.

Refurbished items will include a 12 month warranty unless otherwise stated.

Please contact us if you have received an item which has been damaged in transit or is otherwise not working correctly when you receive it. Subject to availability, we will arrange for a replacement item to be despatched and for the faulty item to be returned to us. 

Amber Technology maintains a nation-wide network of carefully selected Authorised Service Agents to ensure that you are never far from convenient, expert technical and service support. If your item develops a problem and requires servicing under warranty, please contact your local Authorised Service Agent.

Stock Availability

The availability of stock is communicated via the indicator of each product listing page. "Available" means that reasonable stock is in our warehouse, ready for immediate shipment. "Limited Stock" means that we have only a small number of items in stock. "Out of Stock" means this item is currently unavailable for immediate shipment - orders placed for ‘Out of Stock’ items will be fulfilled as soon as replacement stock arrives.

"Special Order” items are products that are not generally kept in stock in Australia. Lead times for Special Order items vary depending on country of origin, manufacturer’s stock levels, factory production schedules and/or incoming shipment transit times. Please contact us for an estimate as to the likely lead time. Please note that finalized sales for special order items cannot be cancelled.

Refurbished items

If refurbished stock is available, this will be shown on the summary page for the product. If a product listing only allows you to choose refurbished stock, we are not holding new stock and we can no longer obtain new stock.

Refurbished items are always in perfect working order and will include all accessories. Refurbished items are may

  • have a damaged carton
  • have been used for demonstrations
  • have been repaired
  • have minor imperfections that do not impact performance.

Refurbished items include a 12-Month warranty unless otherwise stated.

Technical Support

Please visit the Get Support page to find a service agent, log a service ticket, or ask a technical question about your product.

Returns

Please contact us if you have received an item which has been damaged in transit or is otherwise not working correctly when you receive it. Subject to availability, we will arrange for a replacement item to be despatched and for the faulty item to be returned to us.  

Accessories

  inc GST
RRP $1,149.00
 
(Each)
  inc GST
RRP $1,809.00
 
(Each)